Search results
Jump to navigation
Jump to search
Page title matches
- ...rewall matcher that allow to capture traffic based on present speed of the connection. ...r) is added to "connection-bytes" value for this entry. (in another words "connection-bytes" includes both - upload and download)7 KB (955 words) - 12:15, 29 January 2015
Page text matches
- ...rewall matcher that allow to capture traffic based on present speed of the connection. ...r) is added to "connection-bytes" value for this entry. (in another words "connection-bytes" includes both - upload and download)7 KB (955 words) - 12:15, 29 January 2015
- ==Connection tracking entries== <p id="shbox"><b>Sub-menu:</b> <code>/ip firewall connection</code></p>5 KB (628 words) - 11:54, 29 January 2015
- ...e a sub-stream can be download or upload for one particular client (IP) or connection to server. * '''pcq-rate''' (number) : maximal available data rate of each sub-steam4 KB (617 words) - 10:29, 24 November 2015
- Each queue in HTB has two rate limits: * '''CIR''' (Committed Information Rate) – ('''limit-at''' in RadioOS) worst case scenario, flow will get this am10 KB (1,488 words) - 10:09, 24 November 2015
- ...... ports on the router and allows to configure port parameters, like baud-rate, flow-control, etc. ...NAME CHANNELS USED-BY BAUD-RATE6 KB (771 words) - 17:42, 17 December 2015
- |desc=Modifies connection MSS settings: * <var>yes</var> - adjust connection MSS value16 KB (2,373 words) - 16:54, 26 August 2015
- Per Connection Queue (PCQ) is a queuing discipline that can be used to dynamically equaliz /queue type add name="PCQ_download" kind=pcq pcq-rate=64000 pcq-classifier=dst-address2 KB (321 words) - 10:49, 24 November 2015
- ...place a mark specified by the new-connection-mark parameter on the entire connection that matches the rule <td><var><b>connection-bytes</b></var> (<em>integer-integer</em>; Default: <b></b>)</td>24 KB (3,688 words) - 12:06, 29 January 2015
- [Q - quit connection] [B - send break] [A - send Ctrl-A prefix] [R - autoconfigure rate]4 KB (439 words) - 17:02, 17 December 2015
- ...ent settings. Profiles are like User groups with the same set of settings, rate-limit, filter chain name, etc. ...advertisement is shown, before blocking network access for HotSpot client. Connection to Internet is not allowed, when advertisement is not shown.9 KB (1,223 words) - 12:25, 29 January 2015
- ...ot work in scenarios with NAT. Services that require the initiation of TCP connection from outside the private network or stateless protocols such as UDP, can be ...client the same source/destination IP address from supplied range for each connection. This is most frequently used for services that expect the same client addr24 KB (3,661 words) - 12:07, 29 January 2015
- ...gger than the ''frames'' count then you need to troubleshoot this wireless connection. .... In case of AR9300 and newer Atheros wireless chipsets "tx-power-mode=all-rate-fixed" is the only option as "card-rates" option isn't working on those chi13 KB (2,098 words) - 17:32, 26 August 2015
- ...ll give you more specific informantion on each step of the Client wireless connection and disconnection. The first line shows that the wireless client tried to c '''<MAC>@<DEV>: lost connection, <REASON>'''9 KB (1,462 words) - 16:57, 26 January 2015
- <li> internal flow and connection marks <li> rate at which packets arrive and sequence numbers27 KB (4,147 words) - 12:02, 29 January 2015
- /port set serial0 baud-rate=19200 data-bits=8 parity=none stop-bits=1 You can also try to let RadioOS guess the needed baud rate by setting8 KB (1,434 words) - 18:17, 17 December 2015
- ...do not plan to use a serial port for accessing another device or for data connection through a modem, you can configure it as a serial console. The first serial ...-speed microwave modem that needed to be monitored and managed by a serial connection11 KB (1,774 words) - 16:29, 14 December 2015
- ==Connection Terminating from RADIUS== ...ether with Ascend-Xmit-Rate, specifies rx rate. 0 if unlimited. Ignored if Rate-Limit attribute is present29 KB (4,446 words) - 16:08, 26 August 2015
- ...d, the interface "advertises" its maximum capabilities to achieve the best connection possible. |arg=sfp-rate-select19 KB (2,315 words) - 15:39, 26 January 2015
- Connected clients are treated as individual interfaces, after successful connection new station interface is created. phy-rate: 2.3Gbps14 KB (1,881 words) - 18:31, 25 March 2019
- # ADDRESS RATE PEEK-RATE TOTAL <td><var><b>peek-rate</b></var> (<em>read-only: integer/integer</em>)</td>21 KB (2,704 words) - 15:26, 14 December 2015