Administrator: Created page with "== Download == CableFree User Manager can be downloaded from CableFree upon request, as an additional software package. == Install == Perform the usual steps - upload the Use..."

2016-05-10T17:14:36Z

Created page with "== Download == CableFree User Manager can be downloaded from CableFree upon request, as an additional software package. == Install == Perform the usual steps - upload the Use..."

New page

== Download ==
CableFree User Manager can be downloaded from CableFree upon request, as an additional software package.

== Install ==
Perform the usual steps - upload the User Manager package to the router's FTP server and reboot the router.

== Create first Customer ==
{{ Note|Starting from version 3.0 a default Subscriber/Customer with login ''admin'' and empty password is created when User Manager package is installed for the first time. I.e., the 'admin' subscriber/customer account is created only if the User Manager package was not installed prior to version 3.0.}}

If you are using a version prior to 4-test, Customers were called subscribers, so then the first [[User Manager/Subscribers | subscriber]] must be added using CableFree terminal (console). All the configuration is done under the '''/tool user-manager''' menu.

To create a v3 subscriber or v4-test/v5 Customer you should go to '''/tool user-manager customer''' menu and execute '''add''' command. It will ask for the username which you will use.

or you can enter this into the command line:
<pre>
[admin@USER_MAN] /tool user-manager customer> add login="admin"
password="PASSWORD" permissions=owner

</pre>

You can use the following command to change the password for the 'admin' user:
<pre>
[admin@USER_MAN] /tool user-manager customer set admin password=PASSWORD
</pre>

After that you can use '''print''' command to see what you have added.

<pre>
[admin@USER_MAN] /tool user-manager customer> print
Flags: X - disabled
0 login="admin" password="adminpassword" backup-allowed=yes currency="USD"
time-zone=-00:00 permissions=owner signup-allowed=no paypal-allowed=no
paypal-secure-response=no paypal-accept-pending=no
</pre>
{{Note| Subscriber shown only in version 3}}

After that you can use the web interface.

== Use web interface ==
To log on [[User Manager/Customers | customer]] web interface type the following address in your web browser: http://Router_IP_address/userman

where "Router_IP_address" must be replaced with IP address of your router.

Use login and password of the [[User Manager/Subscribers | subscriber ]] you have created in console.

'''Note:'''
On RadioOS 4.1, User-manger webinterface is unreachable with an HTTP 404 when attempting to navigate to http://inside_ip/userman from behind a Hotspot interface where inside_ip is an non-NAT'd IP address on the router. Two workarounds: change the 'www' service port from 80 to something other than 80 or 8080, such as port 81. Then use http://inside_ip:81/userman, or use an IP address hotspot users are NAT'd to (http://outside_ip/userman) instead.

User Manager/Getting started - Revision history

Administrator: Created page with "== Download == CableFree User Manager can be downloaded from CableFree upon request, as an additional software package. == Install == Perform the usual steps - upload the Use..."