Manual:MAC access
Applies to RadioOS: 2.9, v3, v4
CableFree MAC telnet is used to provide access to a router that has no IP address set. It works just like IP telnet. MAC telnet is possible between two CableFree RadioOS routers only.
Specifications
- Packages required: system
- License required: Level1
- Submenu level: /tool, /tool mac-server
- Standards and Technologies: MAC Telnet
- Hardware usage: Not significant
MAC Telnet Server
- Submenu level: /tool mac-server
Property Description
- interface (name | all; default: all) - interface name to which the mac-server clients will connect
Notes
There is an interface list in this submenu level. If you add some interfaces to this list, you allow MAC telnet to that interface. Disabled (disabled=yes) item means that interface is not allowed to accept MAC telnet sessions on that interface. all interfaces is the default setting to allow MAC telnet on any interface. Example
To enable MAC telnet server on ether1 interface only:
[admin@CableFree] tool mac-server> print Flags: X - disabled # INTERFACE 0 all [admin@CableFree] tool mac-server> remove 0 [admin@CableFree] tool mac-server> add interface=ether1 disabled=no [admin@CableFree] tool mac-server> print Flags: X - disabled # INTERFACE 0 ether1 [admin@CableFree] tool mac-server>
MAC WinBox Server
- Submenu level: /tool mac-server mac-winbox
Property Description
- interface (name | all; default: all) - interface name to which it is allowed to connect with Winbox using MAC-based protocol
Notes
There is an interface list in this submenu level. If you add some interfaces to this list, you allow MAC Winbox to that interface. Disabled (disabled=yes) item means that interface is not allowed to accept MAC Winbox sessions on that interface. Example
To enable MAC Winbox server on ether1 interface only:
[admin@CableFree] tool mac-server mac-winbox> print Flags: X - disabled # INTERFACE 0 all [admin@CableFree] tool mac-server mac-winbox> remove 0 [admin@CableFree] tool mac-server mac-winbox> add interface=ether1 disabled=no [admin@CableFree] tool mac-server mac-winbox> print Flags: X - disabled # INTERFACE 0 ether1 [admin@CableFree] tool mac-server mac-winbox>
Monitoring Active Session List
- Submenu level: /tool mac-server sessions
Property Description
- interface (read-only: name) - interface to which the client is connected to
- src-address (read-only: MAC address) - client's MAC address
- uptime (read-only: time) - how long the client is connected to the server
Example
To see active MAC Telnet sessions:
[admin@CableFree] tool mac-server sessions> print # INTERFACE SRC-ADDRESS UPTIME 0 wlan1 00:0B:6B:31:08:22 00:03:01 [admin@CableFree] tool mac-server sessions>
MAC Scan
- Command name: /tool mac-scan
This command discovers all devices, which support MAC telnet protocol on the given network.
Property Description
- (name) - interface name to perform the scan on
MAC Telnet Client
Command name: /tool mac-telnet Property Description (MAC address) - MAC address of a compatible device
Example
[admin@CableFree] > /tool mac-telnet 00:02:6F:06:59:42 Login: admin Password: Trying 00:02:6F:06:59:42... Connected to 00:02:6F:06:59:42 CCCCCC BB LL FFFFFFF CCC CCC AAAAA BB LL EEEEE FFF RRRRR EEEEE EEEEE CCC AA BBBBBB LL EE EE FFFFFF RR EE EE EE EE CCC AAAAAA BB BB LL EEEEEE FFF RR EEEEEE EEEEEE CCC CCC AA AA BB BB LL EE FFF RR EE EE CCCCCC AAAAAA BBBBBB LL EEEEE FFF RR EEEEE EEEEE CableFree RouterOS 6.39rc20 (c) 1999-2017 www.wirelessexcellence.com Terminal linux detected, using multiline input mode [admin@CableFree] >