Manual:Default Configurations
Jump to navigation
Jump to search
All CableFree Radios come with a Factory Default Configuration.
This Default Configuration is generally set by a script using Command Line Terminal. The scripts are specific to each product type.
If you need to return your radio to Factory Default Configuration then you will need to do the following:
- System Reset (in Command Line)
- Press "yes" which will reboot the device with a blank configuration
- Log back onto the device using MAC address (as the IP address will be removed by the System Reset)
- Open "New Terminal" using Winbox
- Copy the Script from text editor on your PC
- Paste using right-click and "Paste"
The Factory Default Configuration should now be live on the device, including IP addresses
Please contact Wireless Excellence if you require advice regarding Default Configuration scripts.
[ Top | Back to Content ]