Manual:IP/SMB
Jump to navigation
Jump to search
Summary
Sub-menu: /ip smb
Packages required: system
SMB 1.0 server provides file sharing access to configured folders of the router.
Server settings
Property | Description |
---|---|
allow-guests (yes | no; Default: yes) | If SMB guest user is allowed to access created shares |
comment (string; Default: CableFreeSMB) | |
domain (string; Default: MSHOME) | Name of windows workgroup |
enabled (yes | no; Default: no) | Enable/disable SMB service |
interface (string; Default: all) | List of interfaces on which SMB service will be running. all - smb will be available on all interfaces. |
Sub-menu: /ip smb share
Sub menu allows to configure share names and directories that will be accessible by SMB.
If directory provided in configuration does not exist it will be created automatically.
Property | Description |
---|---|
disabled (yes | no; Default: no) | If disabled, share will not be accessible. |
max-sessions (number; Default: 10) | How many SMB simultaneous connections are allowed to shared folder |
name (string; Default: ) | Name of the SMB share |
directory (string; Default: ) | Directory on router assigned to SMB share. If left empty value of name argument will be used from the root folder. |
User setup
Sub-menu: /ip smb share
Set up users that can access SMB shares of the router.
Property | Description |
---|---|
disabled (yes | no; Default: no) | If SMB service is enabled |
name (string; Default: ) | login name of the SMB service user |
password (string; Default: ) | password for SMB user to connect to SMB service |
read-only (yes | no; Default: yes) | Sets if user has only read-only rights when accessing shares or full access. |
Example
To make some RadioOS folder available through SMB service follow these steps:
- create user:
/ip smb user add read-only=no name=mtuser password=mtpasswd
- add shared folder
/ip smb share add name=backup
- enable SMB service
/ip smb set enabled=yes
Now check for results:
- Check general service settings:
/ip smb print
[admin@CableFree] /ip smb> print enabled: yes domain: MSHOME comment: CableFreeSMB allow-guests: yes interfaces: all
- SMB user settings:
/ip smb users print
[admin@CableFree] /ip smb> users print Flags: * - default, X - disabled # NAME PASSWORD READ-ONLY 0 * guest yes 1 mtuser mtpasswd no
- And finally SMB shares settings:
/ip smb shares print
[admin@CableFree] /ip smb> shares print
Flags: X - disabled, I - inactive, * - default # NAME DIRECTORY MAX-SESSIONS 0 * ;;; default share pub /pub 10 1 backup /backup 10
Now additional configuration changes can be done, like disabling default user and share etc.