Manual:IPv6/Pool
Jump to navigation
Jump to search
Summary
Sub-menu: /ipv6 pool
Standards:
Package : IPv6
IPv6 pools are used to define range of IPv6 addresses that is used for DHCPv6 server and Point-to-Point servers
IPv6 pools simply group IPv6 addresses for further usage. It is a single configuration point for all features that assign IPv6 addresses to clients.
Pool Configuration
Property | Description |
---|---|
name (string; Default: ) | Descriptive name of the pool. |
prefix (IPv6/0..128; Default: ) | Ipv6 address prefix |
prefix-length (integer [1..128]; Default: ) | Option represents the prefix size that will be give out to the client. |
Read-only properties
Property | Description |
---|---|
dynamic (yes | no) | Whether pool is dynamic. |
id (integer) | |
expire-time (time) | Expire time is set to dynamic pools added by DHCPv6 client. |
Example
Define a pool named "test" with prefix "2001::/64":
[admin@test-host] /ipv6 pool> add name: test prefix: 2001::/60 prefix-length: 62 [admin@test-host] /ipv6 pool> print # NAME PREFIX PREFIX-LENGTH 0 test 2001::/60 62bits [admin@test-host] /ipv6 pool>
Used Addresses from Pool
Sub-menu: /ipv6 pool used
In this menu you can see all used IPv6 addresses from the pools.
All properties are read-only.
Property | Description |
---|---|
info (string) | Shows DUID related information received from client (value in hex).Can contain also raw timestamp in hex. |
owner (string) | What reserved the prefix ("DHCP", etc.) |
pool (string) | Name of the pool. |
prefix (IPv6/0..128) | IPv6 prefix that is assigned to client form the pool. |
[ Top | Back to Content ]