Manual:Tools/email
Summary
E-mail tool is the utility that allows to send e-mails from the CableFree device. Tool can be used to send regular configuration backups and exports to network administrator.
Email tool uses only plain authentication and tls encryption. Other methods are not supported.
Properties
Sub-menu: /tool e-mail
This submenu allows to set smtp server that will be used.
Property | Description |
---|---|
from (string; Default: <>) | Name or email address that will be shown as receiver. |
password (string; Default: "") | Password used for authenticate to SMTP server. |
address (IP/IPv6 address; Default: 0.0.0.0) | SMTP server's IP address. |
port (integer[0..65535]; Default: 25) | SMTP server's port. |
username (string; Default: "") | Username used for authenticate to SMTP server. |
Note: All server's configuration (if specified) can be overridden by send command.
Sending Email
Command: /tool e-mail send
Send command takes following parameters:
Property | Description |
---|---|
body (string; Default: ) | Actual body of the email message |
cc (string; Default: ) | Send a copy to listed recipients. |
file (string; Default: ) | Name of the file that will be attached to the email. Only one file can be attached. |
from (string; Default: ) | Name or email address which will appear as sender. If not specified value from server's configuration is used. |
password (string; Default: ) | Password used to authenticate to SMTP server. If not specified value from server's configuration is used. |
port (integer[0..65535]; Default: ) | Port of SMTP server. If not specified, value from server's configuration is used. |
server (IP/IPv6 address; Default: ) | Ip or IPv6 address of SMTP server. If not specified, value from server's configuration is used. |
subject (string; Default: ) | Subject of the message. |
tls (yes|no; Default: yes) | Whether to use tls encryption or not. |
to (string; Default: ) | Destination email address |
user (string; Default: ) | Username used to authenticate to SMTP server. If not specified, value from server's configuration is used. |
Basic examples
This example will show how to send email with configuration export every 24hours.
1. Configure SMTP server
[admin@CableFree] /tool e-mail> set server=10.1.1.1 port=25 from="router@mydomain.com"
2. Add new script named "export-send"
/export file=export /tool e-mail send to="config@mydomain.com" subject="$[/system identity get name] export) \ body="$[/system clock get date] configuration file" file=export.rsc
3. Add scheduler to run our script
/system scheduler add on-event="export-send" start-time=00:00:00 interval=24h
Send e-mail to server using TLS/SSL encryption. For example, Google mail requires that.
1. configure client to connect to correct server
/tool e-mail set address=173.194.77.108 set port=587 set from=myuser@gmail.com set user=myuser set password=mypassword
2. send e-mail using send command with tls attribute set to yes
send to=myuser@anotherdomain.com subject="email test" body="email test" tls=yes
[ Top | Back to Content ]